Flarespace 2007+ Mercedes Sprinter 170" Full Flares

Typically ships in 3-4 weeks. 

Looking to sleep sideways in your Mercedes Sprinter 170"WB camper van? These Flarespace 2007+ Mercedes Sprinter 170" Full Flares replace the stock rear upper body panels in your Sprinter, providing extra lateral space to enable you to sleep sideways in your campervan. Install these Flarespace flares and you'll be able to have over 80" wide sleeping platform and a very comfortable night's sleep, without interfering with any of the doors on the van.

Note: Flares are only sold in pairs (one passenger-side, one driver-side), flares are not sold individually. The FS1033 Awning window is compatible with the passenger side Flare and the passenger side sliding cargo door for 170" models!

Shipping on this item is $99. Not compatible with vans that have factory or aftermarket middle windows.

Key Features

• Flares are designed to fit the rear quarter factory window cutouts on low-roof or high-roof 2007+ Mercedes Sprinter 170"WB vans.
• Flares are made of polyester resin (fiberglass) 
• Package comes with two unpainted flares, approved 3M installation materials, and detailed installation instructions
• Full Flare models add extra width to the rear of your Sprinter campervan, increasing bed length over 80" wide 
  
• Flarespace Half Slider Window 1033 or AW1033 Awning Window(choose in menu)
• Detailed installation instructions included.
  
• Proudly made in the USA by Flarespace.
• 1-Year limited warranty

All Flarespace sales may be canceled within 24 hours of ordering. Fiberglass products may not be returned, exchanged or canceled after 24 hours. All other Flarespace products may be evaluated for exchange or return on a case by case basis.

What's Included?

(1) Passenger Side Flare

(1) Driver Side Flare

(2) Tubes of Approved Adhesive for Install

Your selected windows(choose in menu)

Installation Instructions

Documents

Written Installation Instructions

Video Installation Instructions

FAQ

• How are they installed? Your installer will paint your flares to match the color of your Sprinter van. The rear quarter panel is cut out along the factory lines, with the same size cut out as a window. The flares are glued in using the supplied 3M adhesive and sealant. Installers are supplied with detailed step-by-step instructions, including a video and written instructions. Installation takes about 4 hours, plus a day to cure.
• Does the sliding door need to be modified? The stock Sprinter sliding door will open fully without modifications. This also applies for slider doors with CR Laurence windows and T-vent window knobs.
• Will the rear doors still open 270 degrees? If you install an extended door stopper on the rear door, the Sprinter's rear doors can still be opened fully without touching the flares.

Specifications